Shooting World Forums banner

1 - 20 of 21 Posts

·
Registered
Joined
·
105 Posts
Discussion Starter #1
I have been trying to get an avatar of a Remington pump model 7600 for my avatar but cannot seem to get one the proper size. Every time I copy it and try to enter it, I am told that is not small enough. I understand that it has to be no more then 80X80 pixels but cannt seem to get it there. I have tried to even change it in my photo program but no luck. What can I do to get this Avatar? I would really like to have it.
Thanks for any help.
 

·
Registered
Joined
·
105 Posts
Discussion Starter #3
What do I post?
I have the picture now in "my pictures".
I took it from the Remington site. All I did was go to centerfire and find the 7600 pump, not synthetic but wood and copied the picture.
 

·
Registered
Joined
·
143 Posts
Re: re: avatars

elderberry99 said:
What do I post?
I have the picture now in "my pictures".
I took it from the Remington site. All I did was go to centerfire and find the 7600 pump, not synthetic but wood and copied the picture.
so the picture is on the remington website?

give me 5 minutes, and you will have your avatar...
 

·
Registered
Joined
·
143 Posts
ok, try one of these. they have both been resized to 100x100 pixels. they might be a little bit too big, though.


*edit...im having trouble getting the pictures up*


i tried making them 80x80 pixels, but the problem with making them that small is that they get so distorted, that you can hardley tell what they are.

if the ones i posted above dont work, would you like an avatar with remington's logo in it, or something like that?
 

·
Registered
Joined
·
143 Posts
i got them resized just fine, but im having trouble posting the pictures from the site i use to host them.

i'll figure out a way to get them up a little bit later on. i'll make a remington avatar too, and then you can choose which one you want.
 

·
Registered
Joined
·
289 Posts
I resized it down to 100 x 20 and it looks to be about the right size to fit in the area available on this forum. You might try that.

ps

I had not read all the details of the 'instructions'. Now it is down to 80 wide by 15 high and works for me.
 

·
Registered
Joined
·
143 Posts
lets see if this works...


edit - its still not working.

for some reason the image tags arent working.

i'll get if figured out sooner or later...
 

·
Registered
Joined
·
105 Posts
Discussion Starter #13
I appreciate all the efforts. I can always wait until we get a North Carolina Flag and use that I guess.
I do not want anyone to put themselves out for this.
 

·
Registered
Joined
·
105 Posts
Discussion Starter #15
Chips,
Thanks but it did not take it. It still tells me that it has to be no more then 80x80 pixels aand the picture is more.
Can you find the Remington logo somewhere and try that one for me?
Thanks again for all the effort.
 

·
Registered
Joined
·
105 Posts
Discussion Starter #19
Papadoodles,
Thanks, but it will not let me use that one. The file has to be less then 6kb.
I will continue to use the Remy Logo until a better Remington logo can be found.
I think I am better off with the Remy logo any way as the rifle is so small, you cannot tell what it is.
Thanks to you and Chips for all the help. Chips said he is still looking for a better Remy logo so I am really curious as to what he can find next.
Again, thanks for all the help.
 

·
Registered
Joined
·
143 Posts
ive got a couple more, just give me some time to get em' posted. hunt101 is running really slow, so i might have to find another host...
 
1 - 20 of 21 Posts
Top