Winchester 190 .22 cal Problem

Discussion in 'Gunsmithing & Restoration' started by [Smoke], Jan 23, 2005.

  1. [Smoke]

    [Smoke] Active Member

    34
    0
    0
    Sometimes it fires...sometimes it doesn't. When I eject the misfired round, there is a mark on the bottom like the pin hit it but no shot. I've used different ammo and brands but does the same thing. Any idea's?
     
  2. MarlandS

    MarlandS Guest

    116
    0
    0
    First thing I'd try would be to take a decent solvent and spray down the hole for the firing pin. It might be something as simple as dirt impeding the firning pins travel.
     

  3. RON KONTOWSKY

    RON KONTOWSKY Active Member

    29
    0
    0
    ALSO CLEAN YOUR CHAMBER ,PROBIBLY A BUILD UP A RESIDUE NOT ALLOWING YOUT BULLET TO FULLY SEAT.

    R.A.K.
     
  4. Anonymous

    Anonymous Guest

    1. Make sure your barrel is pushed in all the way and the nut is tight... :oops: